# This file is used both for the nightly regression tests
# on the battra server, and for the CI tests on Travis CI
# In the case of Travis CI, some of the parameters entered
# below are overwritten, see prepare_file_travis.py
[main]
testTopDir     = /home/regtester/AMReX_RegTesting/rt-WarpX/
webTopDir      = /home/regtester/AMReX_RegTesting/rt-WarpX/web

sourceTree = C_Src

# suiteName is the name prepended to all output directories
suiteName = WarpX

COMP = g++
FCOMP = gfortran
add_to_c_make_command = TEST=TRUE USE_ASSERTION=TRUE WarpxBinDir=

purge_output = 1

MAKE = make
numMakeJobs = 8

# MPIcommand should use the placeholders:
#   @host@ to indicate where to put the hostname to run on
#   @nprocs@ to indicate where to put the number of processors
#   @command@ to indicate where to put the command to run
#
# only tests with useMPI = 1 will run in parallel
# nprocs is problem dependent and specified in the individual problem
# sections.

#MPIcommand = mpiexec -host @host@ -n @nprocs@ @command@
MPIcommand = mpiexec -n @nprocs@ @command@
MPIhost =

reportActiveTestsOnly = 1

# Add "GO UP" link at the top of the web page?
goUpLink = 1

# email
sendEmailWhenFail = 1
emailTo = weiqunzhang@lbl.gov, jlvay@lbl.gov, rlehe@lbl.gov, atmyers@lbl.gov, mthevenet@lbl.gov, jaehongpark@lbl.gov, oshapoval@lbl.gov, henri.vincenti@cea.fr, ldianaamorim@lbl.gov, rjambunathan@lbl.gov, axelhuebl@lbl.gov
emailBody = Check https://ccse.lbl.gov/pub/RegressionTesting/WarpX/ for more details.

[AMReX]
dir = /home/regtester/AMReX_RegTesting/amrex/
branch = development

[source]
dir = /home/regtester/AMReX_RegTesting/warpx
branch = dev

[extra-PICSAR]
dir = /home/regtester/AMReX_RegTesting/picsar/
branch = master

# individual problems follow

[pml_x_yee]
buildDir = .
inputFile = Examples/Tests/PML/inputs.2d
runtime_params = warpx.do_dynamic_scheduling=0 algo.maxwell_fdtd_solver=yee
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
analysisRoutine = Examples/Tests/PML/analysis_pml_yee.py

[pml_x_ckc]
buildDir = .
inputFile = Examples/Tests/PML/inputs.2d
runtime_params = warpx.do_dynamic_scheduling=0 algo.maxwell_fdtd_solver=ckc
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
analysisRoutine = Examples/Tests/PML/analysis_pml_ckc.py

[pml_x_psatd]
buildDir = .
inputFile = Examples/Tests/PML/inputs.2d
runtime_params = warpx.do_dynamic_scheduling=0
dim = 2
addToCompileString = USE_PSATD=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
analysisRoutine = Examples/Tests/PML/analysis_pml_psatd.py

[RigidInjection_lab]
buildDir = .
inputFile = Examples/Modules/RigidInjection/inputs.LabFrame
runtime_params =
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0
analysisRoutine = Examples/Modules/RigidInjection/analysis_rigid_injection_LabFrame.py

[RigidInjection_BTD]
buildDir = .
inputFile = Examples/Modules/RigidInjection/inputs.BoostedFrame
runtime_params =
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0
doComparison = 0
aux1File = Tools/read_raw_data.py
analysisRoutine = Examples/Modules/RigidInjection/analysis_rigid_injection_BoostedFrame.py

[BTD_ReducedSliceDiag]
buildDir = .
inputFile = Examples/Modules/boosted_diags/inputs.3d.slice
dim = 3
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0
doComparison = 0
aux1File = Tools/read_raw_data.py
analysisRoutine = Examples/Modules/boosted_diags/analysis_3Dbacktransformed_diag.py

[nci_corrector]
buildDir = .
inputFile = Examples/Modules/nci_corrector/inputs.2d
runtime_params = amr.max_level=0 particles.use_fdtd_nci_corr=1
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
doComparison = 0
analysisRoutine = Examples/Modules/nci_corrector/analysis_ncicorr.py

[nci_correctorMR]
buildDir = .
inputFile = Examples/Modules/nci_corrector/inputs.2d
runtime_params = amr.max_level=1 particles.use_fdtd_nci_corr=1 amr.n_cell=64 64 warpx.fine_tag_lo=-20.e-6 -20.e-6 warpx.fine_tag_hi=20.e-6 20.e-6
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
doComparison = 0
analysisRoutine = Examples/Modules/nci_corrector/analysis_ncicorr.py

[ionization_lab]
buildDir = .
inputFile = Examples/Modules/ionization/inputs.rt
runtime_params =
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
analysisRoutine = Examples/Modules/ionization/analysis_ionization.py

[ionization_boost]
buildDir = .
inputFile = Examples/Modules/ionization/inputs.bf.rt
runtime_params =
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
analysisRoutine = Examples/Modules/ionization/analysis_ionization.py

[bilinear_filter]
buildDir = .
inputFile = Examples/Tests/SingleParticle/inputs
runtime_params = warpx.use_filter=1 warpx.filter_npass_each_dir=1 5
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
analysisRoutine = Examples/Tests/SingleParticle/analysis_bilinear_filter.py

[Langmuir_2d]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.rt
runtime_params = electrons.ux=0.01 electrons.xmax=0.e-6 warpx.fields_to_plot=Ex jx electrons.plot_vars=w ux Ex
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir2d.py
analysisOutputImage = langmuir2d_analysis.png

[Langmuir_2d_nompi]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.rt
runtime_params = electrons.ux=0.01 electrons.xmax=0.e-6 warpx.fields_to_plot=Ex jx electrons.plot_vars=w ux Ex
dim = 2
addToCompileString =
restartTest = 0
useMPI = 0
numprocs = 1
useOMP = 2
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir2d.py
analysisOutputImage = langmuir2d_analysis.png

[Langmuir_x]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.rt
runtime_params = electrons.ux=0.01 electrons.xmax=0.e-6 warpx.do_dynamic_scheduling=0 warpx.fields_to_plot = Ex jx electrons.plot_vars=w ux Ex
dim = 3
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir.py
analysisOutputImage = langmuir_x_analysis.png

[Langmuir_y]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.rt
runtime_params = electrons.uy=0.01 electrons.ymax=0.e-6 warpx.do_dynamic_scheduling=0 warpx.fields_to_plot = Ey jy electrons.plot_vars=w uy Ey
dim = 3
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir.py
analysisOutputImage = langmuir_y_analysis.png

[Langmuir_z]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.rt
runtime_params = electrons.uz=0.01 electrons.zmax=0.e-6 warpx.do_dynamic_scheduling=0  warpx.fields_to_plot = Ez jz electrons.plot_vars=w uz Ez
dim = 3
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir.py
analysisOutputImage = langmuir_z_analysis.png

[Langmuir_multi]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.multi.rt
runtime_params = warpx.do_dynamic_scheduling=0
dim = 3
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons positrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir_multi.py
analysisOutputImage = langmuir_multi_analysis.png

[Langmuir_multi_nodal]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.multi.rt
runtime_params = warpx.do_dynamic_scheduling=0 warpx.do_nodal=1
dim = 3
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons positrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir_multi.py
analysisOutputImage = langmuir_multi_analysis.png

[Langmuir_multi_psatd]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.multi.rt
runtime_params = psatd.fftw_plan_measure=0
dim = 3
addToCompileString = USE_PSATD=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
tolerance = 5.e-11
particleTypes = electrons positrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir_multi.py
analysisOutputImage = langmuir_multi_analysis.png

[Langmuir_multi_psatd_nodal]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.multi.rt
runtime_params = psatd.fftw_plan_measure=0 warpx.do_dynamic_scheduling=0 warpx.do_nodal=1
dim = 3
addToCompileString = USE_PSATD=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
tolerance = 5.e-11
particleTypes = electrons positrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir_multi.py
analysisOutputImage = langmuir_multi_analysis.png

[Langmuir_multi_2d_nodal]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.multi.2d.rt
runtime_params = warpx.do_nodal=1 algo.current_deposition=direct electrons.plot_vars=w ux uy uz Ex Ey Ez positrons.plot_vars=w ux uy uz Ex Ey Ez
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons positrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir_multi_2d.py
analysisOutputImage = langmuir_multi_2d_analysis.png

[Langmuir_multi_2d_psatd]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.multi.2d.rt
runtime_params = psatd.fftw_plan_measure=0 electrons.plot_vars=w ux uy uz Ex Ey Ez positrons.plot_vars=w ux uy uz Ex Ey Ez warpx.fields_to_plot=Ex Ey Ez jx jy jz part_per_cell
dim = 2
addToCompileString = USE_PSATD=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons positrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir_multi_2d.py
analysisOutputImage = langmuir_multi_2d_analysis.png

[Langmuir_multi_2d_psatd_nodal]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.multi.2d.rt
runtime_params = psatd.fftw_plan_measure=0 warpx.do_nodal=1 algo.current_deposition=direct electrons.plot_vars=w ux uy uz Ex Ey Ez positrons.plot_vars=w ux uy uz Ex Ey Ez warpx.fields_to_plot=Ex Ey Ez jx jy jz part_per_cell
dim = 2
addToCompileString = USE_PSATD=TRUE
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons positrons
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir_multi_2d.py
analysisOutputImage = langmuir_multi_2d_analysis.png

[Langmuir_multi_rz]
buildDir = .
inputFile = Examples/Tests/Langmuir/inputs.multi.rz.rt
runtime_params = electrons.plot_vars=w ux uy uz Ex Ey Ez Bx By ions.plot_vars=w ux uy uz Ex Ey Ez Bx By
dim = 2
addToCompileString = USE_RZ=TRUE
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons ions
analysisRoutine = Examples/Tests/Langmuir/analysis_langmuir_multi_rz.py
analysisOutputImage = langmuir_multi_rz_analysis.png

[Python_Langmuir_rz_multimode]
buildDir = .
inputFile = Examples/Tests/Langmuir/PICMI_inputs_langmuir_rz_multimode_analyze.py
runtime_params =
customRunCmd = python PICMI_inputs_langmuir_rz_multimode_analyze.py
dim = 2
addToCompileString = USE_PYTHON_MAIN=TRUE USE_RZ=TRUE
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons protons
outputFile = diags/plotfiles/plt00040

[LaserInjection]
buildDir = .
inputFile = Examples/Modules/laser_injection/inputs.rt
runtime_params =
dim = 3
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0
analysisRoutine = Examples/Modules/laser_injection/analysis_laser.py
analysisOutputImage = laser_analysis.png

[LaserInjection_2d]
buildDir = .
inputFile = Examples/Modules/laser_injection/inputs.2d.rt
runtime_params = warpx.do_dynamic_scheduling=0 warpx.serialize_ics=1
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0

[LaserAcceleration]
buildDir = .
inputFile = Examples/Physics_applications/laser_acceleration/inputs.3d
runtime_params = warpx.do_dynamic_scheduling=0 amr.n_cell=32 32 256 max_step=100 electrons.zmin=0.e-6 warpx.serialize_ics=1
dim = 3
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons

[subcyclingMR]
buildDir = .
inputFile = Examples/Tests/subcycling/inputs.2d
runtime_params = warpx.serialize_ics=1 warpx.do_dynamic_scheduling=0
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
tolerance = 1.e-10
doVis = 0
compareParticles = 0

[LaserAccelerationMR]
buildDir = .
inputFile = Examples/Physics_applications/laser_acceleration/inputs.2d
runtime_params = amr.max_level=1 max_step=200 warpx.serialize_ics=1 warpx.fine_tag_lo=-5.e-6 -35.e-6 warpx.fine_tag_hi=5.e-6 -25.e-6
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons beam

[PlasmaAccelerationMR]
buildDir = .
inputFile = Examples/Physics_applications/plasma_acceleration/inputs.2d
runtime_params = amr.max_level=1 amr.n_cell=32 512 max_step=400 warpx.serialize_ics=1 warpx.do_dynamic_scheduling=0
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = beam driver plasma_e

[Python_Langmuir]
buildDir = .
inputFile = Examples/Tests/Langmuir/PICMI_inputs_langmuir_rt.py
runtime_params =
customRunCmd = python PICMI_inputs_langmuir_rt.py
dim = 3
addToCompileString = USE_PYTHON_MAIN=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons
outputFile = diags/plotfiles/plt00040

[uniform_plasma_restart]
buildDir = .
inputFile = Examples/Physics_applications/uniform_plasma/inputs.3d
runtime_params =
dim = 3
addToCompileString =
restartTest = 1
restartFileNum = 6
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0
particleTypes = electrons
tolerance = 1.e-14

[particles_in_pml_2d]
buildDir = .
inputFile = Examples/Tests/particles_in_PML/inputs.2d
runtime_params =
dim = 2
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 0
analysisRoutine = Examples/Tests/particles_in_PML/analysis_particles_in_pml.py

[particles_in_pml]
buildDir = .
inputFile = Examples/Tests/particles_in_PML/inputs
runtime_params =
dim = 3
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0
analysisRoutine = Examples/Tests/particles_in_PML/analysis_particles_in_pml.py

[photon_pusher]
buildDir = .
inputFile = Examples/Tests/photon_pusher/inputs
runtime_params =
dim = 3
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0
analysisRoutine =  Examples/Tests/photon_pusher/analysis_photon_pusher.py


[radiation_reaction]
buildDir = .
inputFile = Examples/Tests/radiation_reaction/test_const_B_analytical/inputs
dim = 3
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0
analysisRoutine =  Examples/Tests/radiation_reaction/test_const_B_analytical/analysis_classicalRR.py

[qed_breit_wheeler_tau_init]
buildDir = .
inputFile = Examples/Modules/qed/breit_wheeler/inputs.2d_test_tau_init
runtime_params =
dim = 2
addToCompileString = QED=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0
analysisRoutine = Examples/Modules/qed/breit_wheeler/analysis_2d_tau_init.py

[qed_quantum_sync_tau_init]
buildDir = .
inputFile = Examples/Modules/qed/quantum_synchrotron/inputs.2d_test_tau_init
runtime_params =
dim = 2
addToCompileString = QED=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 0
analysisRoutine = Examples/Modules/qed/quantum_synchrotron/analysis_2d_tau_init.py

[particle_pusher]
buildDir = .
inputFile = Examples/Tests/particle_pusher/inputs
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 0
analysisRoutine =  Examples/Tests/particle_pusher/analysis_pusher.py

[Python_gaussian_beam]
buildDir = .
inputFile = Examples/Modules/gaussian_beam/PICMI_inputs_gaussian_beam.py
customRunCmd = python PICMI_inputs_gaussian_beam.py
dim = 3
addToCompileString = USE_PYTHON_MAIN=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons

[PlasmaAccelerationBoost2d]
buildDir = .
inputFile = Examples/Physics_applications/plasma_acceleration/inputs.2d.boost
runtime_params = warpx.do_dynamic_scheduling=0 warpx.serialize_ics=1 amr.n_cell=64 256 max_step=20
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0

[Python_PlasmaAcceleration]
buildDir = .
inputFile = Examples/Physics_applications/plasma_acceleration/PICMI_inputs_plasma_acceleration.py
customRunCmd = python PICMI_inputs_plasma_acceleration.py
dim = 3
addToCompileString = USE_PYTHON_MAIN=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = beam

[Python_PlasmaAccelerationMR]
buildDir = .
inputFile = Examples/Physics_applications/plasma_acceleration/PICMI_inputs_plasma_acceleration_mr.py
customRunCmd = python PICMI_inputs_plasma_acceleration_mr.py
dim = 3
addToCompileString = USE_PYTHON_MAIN=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = beam

[PlasmaAccelerationBoost3d]
buildDir = .
inputFile = Examples/Physics_applications/plasma_acceleration/inputs.3d.boost
runtime_params = warpx.do_dynamic_scheduling=0 warpx.serialize_ics=1 amr.n_cell=64 64 128 max_step=5
dim = 3
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0

[PlasmaMirror]
buildDir = .
inputFile = Examples/Physics_applications/plasma_mirror/inputs.2d
runtime_params = warpx.do_dynamic_scheduling=0 warpx.serialize_ics=1 amr.n_cell=256 128 max_step=20
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0

[momentum-conserving-gather]
buildDir = .
inputFile = Examples/Physics_applications/plasma_acceleration/inputs.2d
runtime_params = amr.max_level=1 amr.n_cell=32 512 max_step=400 warpx.serialize_ics=1 warpx.do_dynamic_scheduling=0 algo.field_gathering=momentum-conserving
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = beam driver plasma_e

[LaserAccelerationRZ]
buildDir = .
inputFile = Examples/Physics_applications/laser_acceleration/inputs.rz
runtime_params = max_step=10
dim = 2
addToCompileString = USE_RZ=TRUE
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
runtime_params = electrons.plot_vars=w ux uy uz Ex Ey Ez Bx By beam.plot_vars=w ux uy uz Ex Ey Ez Bx By
compareParticles = 1
particleTypes = electrons beam

[Python_LaserAccelerationMR]
buildDir = .
inputFile = Examples/Physics_applications/laser_acceleration/PICMI_inputs_laser_acceleration.py
customRunCmd = python PICMI_inputs_laser_acceleration.py
dim = 3
addToCompileString = USE_PYTHON_MAIN=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons

[Python_Langmuir_2d]
buildDir = .
inputFile = Examples/Tests/Langmuir/PICMI_inputs_langmuir2d.py
customRunCmd = python PICMI_inputs_langmuir2d.py
dim = 2
addToCompileString = USE_PYTHON_MAIN=TRUE
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0
compareParticles = 1
particleTypes = electrons

[Python_Langmuir_rz_multimode]
buildDir = .
inputFile = Examples/Tests/Langmuir/PICMI_inputs_langmuir_rz.py
customRunCmd = python PICMI_inputs_langmuir_rz.py
dim = 2
addToCompileString = USE_PYTHON_MAIN=TRUE USE_RZ=TRUE
restartTest = 0
useMPI = 1
numprocs = 4
useOMP = 1
numthreads = 1
compileTest = 0
doVis = 0

[GPU_inputs]
buildDir = .
inputFile = Examples/Tests/gpu_test/inputs
runtime_params = warpx.do_dynamic_scheduling=0 warpx.serialize_ics=1
dim = 3
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0

[LaserOnFine]
buildDir = .
inputFile = Examples/Tests/laser_on_fine/inputs.2d
runtime_params = max_step=50
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0

[Larmor]
buildDir = .
inputFile = Examples/Tests/Larmor/inputs.mr
runtime_params = max_step=10
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0

[Uniform_2d]
buildDir = .
inputFile = Examples/Physics_applications/uniform_plasma/inputs.2d
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0

[LaserAccelerationBoost]
buildDir = .
inputFile = Examples/Physics_applications/laser_acceleration/inputs.2d.boost
runtime_params = warpx.do_dynamic_scheduling=0 warpx.serialize_ics=1 amr.n_cell=64 512 max_step=20
dim = 2
addToCompileString =
restartTest = 0
useMPI = 1
numprocs = 2
useOMP = 1
numthreads = 2
compileTest = 0
doVis = 0